+34 935 79 92 84
Large-diameter pipe racks at a gas facility under a blue sky
OIL & GAS

Pipe and valves for the oil and gas industry

We supply oil and gas pipe, flanges, fittings and valves to ASME and ASTM standards, for high-pressure and high-temperature installations.

With every item matched to your specification, from the pipe schedule to the flange class.

05Oil & Gas

We supply oil and gas pipe, flanges, fittings and valves to ASME and ASTM standards, for high-pressure and high-temperature installations.

With every item matched to your specification, from the pipe schedule to the flange class.

ATEX
API 6D
NACE MR0175
OIL AND GAS PIPE AND VALVES

What an oil and gas installation demands of its pipework materials

An oil and gas project arrives with a very precise materials specification: the pipe standard and schedule, the flange class, the material of every fitting and, if the fluid contains H2S, the requirements of NACE MR0175/ISO 15156.

That standard exists because H2S can crack a material that has not been qualified for it, and in this equipment a failure can put people and the environment at risk.

Here, getting supply right means delivering what was specified, item by item, and in time for installation.

A flange of a different class, a fitting without a certificate or a valve without its API 6D documentation can be stopped at receiving inspection on site and hold up the installation.

DISTRIBUTOR FOR THE OIL AND GAS INDUSTRY

Pipe and flanges to specification, documented and on time

ASTM pipe in a range of schedules

Stainless and carbon steel, seamless and welded, to ASTM and DIN.

Flanges from Class 150 to 2500

To ASME B16.5: welding neck, slip-on, socket weld, blind, lap joint and threaded.

Forged fittings, gaskets and bolting

ASME B16.11 Class 3000 and 6000 forged fittings in ASTM A182, spiral-wound gaskets and ASTM bolting.

Alloys for severe service

Duplex, super duplex, Inconel and Hastelloy, with a 3.1 certificate per heat.

Standards
ATEX
API 6D
NACE MR0175
Certificate search
OIL AND GAS: APPLICATIONS

Where our material is used in an oil and gas installation

01

High-pressure lines

Flanged joint with many studs on a large-diameter pipe
02

Sour service (H2S)

Gas plant with filters, large-diameter valves and a high-pressure flammable gas warning sign
03

Vessel and equipment connections

Insulated horizontal vessel with nozzles, flanges and valves at an oil installation
04

Refining and process units

Distillation columns and pipework at a refinery under a blue sky
05

Maintenance shutdowns

Two workers in helmets and protective equipment working on a flanged valve during a shutdown
Technical advice

What does your process need?

We help you make the right choice.

Before you ask for a quote, we talk through your process: fluid, temperature, pressure and the applicable standards…

Sometimes the right item is not the one you were looking for.

Technical warehouse with racks of pipe, valves and industrial material
Xavi Collado, Carbinox Serveis
FAQs

Common questions in oil and gas projects

It depends on the alloy, the format and the quantity, so we give you the exact lead time with our quotation. We work with duplex 2205, super duplex 2507, 254 SMO, 904L, Hastelloy C-22 and C-276 and Inconel, and with other alloys on request. Anything we do not hold in stock we order from the manufacturer. If the project is urgent, let us know when you request the quotation.

API 6D is the API specification for ball, gate, check, plug and axial valves in the oil and gas industry, and it sets requirements for design, materials, testing, marking and documentation. If your project calls for it, we will state in our quotation which valves comply with it and what documentation they are supplied with.

Pipework and manual valves do not. According to the European Commission guidelines on Directive 2014/34/EU, they have no ignition source of their own and fall outside its scope. Equipment that does have one is covered, such as the electric actuator on an automated valve. In a hazardous area the risk of electrostatic charges still has to be assessed, and we review it with you when we define the material.

Yes, when your specification calls for it. NACE MR0175/ISO 15156 sets out how to select materials for H2S-containing environments in oil and gas production. The standard itself points out that it is not necessarily applicable to refining or downstream processes, where the specific standard is NACE MR0103/ISO 17945. Before you place the order, we check which of the two your project requires.

Yes. Every order is shipped with the EN 10204 3.1 certificate and heat number traceability. You can find it with our certificate search tool using the heat number, or the customer name and delivery note number, and if you need it for an audit a few years from now, we will send it to you.