
Pipe and valves for the oil and gas industry
We supply oil and gas pipe, flanges, fittings and valves to ASME and ASTM standards, for high-pressure and high-temperature installations.
With every item matched to your specification, from the pipe schedule to the flange class.
We supply oil and gas pipe, flanges, fittings and valves to ASME and ASTM standards, for high-pressure and high-temperature installations.
With every item matched to your specification, from the pipe schedule to the flange class.
What an oil and gas installation demands of its pipework materials
An oil and gas project arrives with a very precise materials specification: the pipe standard and schedule, the flange class, the material of every fitting and, if the fluid contains H2S, the requirements of NACE MR0175/ISO 15156.
That standard exists because H2S can crack a material that has not been qualified for it, and in this equipment a failure can put people and the environment at risk.
Here, getting supply right means delivering what was specified, item by item, and in time for installation.
A flange of a different class, a fitting without a certificate or a valve without its API 6D documentation can be stopped at receiving inspection on site and hold up the installation.
Pipe and flanges to specification, documented and on time
ASTM pipe in a range of schedules
Stainless and carbon steel, seamless and welded, to ASTM and DIN.
Flanges from Class 150 to 2500
To ASME B16.5: welding neck, slip-on, socket weld, blind, lap joint and threaded.
Forged fittings, gaskets and bolting
ASME B16.11 Class 3000 and 6000 forged fittings in ASTM A182, spiral-wound gaskets and ASTM bolting.
Alloys for severe service
Duplex, super duplex, Inconel and Hastelloy, with a 3.1 certificate per heat.
Where our material is used in an oil and gas installation
High-pressure lines

Sour service (H2S)

Vessel and equipment connections

Refining and process units

Maintenance shutdowns

What does your process need?
Before you ask for a quote, we talk through your process: fluid, temperature, pressure and the applicable standards…
Sometimes the right item is not the one you were looking for.








