+34 935 79 92 84
Dairy processing room with separators, tanks and stainless steel pipework
FOOD AND BEVERAGE INDUSTRY

Hygienic stainless steel tube and valves for the food and beverage industry

We supply hygienic stainless steel tube, valves and fittings in 304L and 316L to the food and beverage industry, for process lines, CIP cleaning and packaging.

With a 3.1 certificate and heat number traceability on every order.

02Food and beverage

We supply hygienic stainless steel tube, valves and fittings in 304L and 316L to the food and beverage industry, for process lines, CIP cleaning and packaging.

With a 3.1 certificate and heat number traceability on every order.

FDA
3-A
EHEDG
FOOD-GRADE TUBE AND VALVES

What a food production line demands of its pipework materials

In the food industry, stainless steel pipework is in contact with the food during production and with the cleaning solutions in every CIP cycle.

Regulation (EC) No 1935/2004 requires the material not to transfer constituents to the food in quantities that could put health at risk, change its composition unacceptably or alter its smell or taste, and to be traceable at every stage. Cleaning also calls for a steel that withstands the temperature, the chlorides and the wash chemistry, cycle after cycle.

That is why, in food processing, the steel grade is chosen together with the cleaning programme, not after the order has been placed.

A grade that falls short on a given section can last months instead of years. We have seen it in a plant with a single production line: the 304L pipework lasted three months and every replacement meant lost production. With Hastelloy C-22 at the critical points, it has been running for more than two years without incident.

DISTRIBUTOR FOR THE FOOD AND BEVERAGE INDUSTRY

Hygienic tube and valves, documented for every section of the line

Food-grade tube and fittings

304L and 316L tube to EN 10357 series A (formerly DIN 11850), DIN 11851 unions and clamp connections to DIN 32676 and ISO 2852.

Traceability back to the heat

EN 10204 3.1 certificate with every order, traceable by heat number or delivery note.

Documented seals and valves

With the compliance your specification calls for: FDA for elastomers, 3-A or EHEDG for hygienic design.

Grade matched to your CIP

Before we propose 304L, 316L or duplex, we review the fluid, temperature and cleaning chemistry.

Standards
FDA
3-A
EHEDG
Certificate search
FOOD PROCESSING: APPLICATIONS

Where our material is used in a food plant

01

Product and transfer lines

Two hygienic stainless steel tubes running through a cheese-making hall
02

CIP/SIP systems

Stainless steel tanks with pump, valves and supply and return pipework in a brewery
03

Filling and packaging

Filling valves of a rotary filler above glass bottles
04

Tank connections

Conical stainless steel fermenters with bottom valves and hygienic connections
05

Ingredient dosing

Group of automatic valves on hygienic stainless steel pipework
Technical advice

What does your process need?

We help you make the right choice.

Before you ask for a quote, we talk through your process: fluid, temperature, pressure and the applicable standards…

Sometimes the right item is not the one you were looking for.

Technical warehouse with racks of pipe, valves and industrial material
Xavi Collado, Carbinox Serveis
FAQs

Common questions in food and beverage projects

Yes. We supply integrators, skid manufacturers and engineering firms, and we review the specification with them before the order is placed, while an item can still be changed without having to redo the order. Our Process Engineering page explains how we work with them.

Yes. We supply them with the food-contact compliance documentation your specification calls for, and with FDA 21 CFR 177.2600 compliance when your customer requires it.

When the temperature, the chloride content of the product or the water, or the cleaning chemistry goes beyond what 316L can withstand. The same 316L can be right in one installation and fall short in the one next door if its CIP cycles are more aggressive. That is why, before we recommend a grade, we ask you about the fluid, the temperature and the cleaning programme.

EN 10357 replaced DIN 11850 in early 2014, and DIN 11850 has been withdrawn. Series A of EN 10357 keeps the dimensions of the former DIN 11850, so a specification that still calls for DIN 11850 can usually be met with EN 10357 series A tube. We confirm this with you when we review the specification.

Yes. Every order is shipped with the EN 10204 3.1 certificate and heat number traceability. You can find it with our certificate search tool using the heat number, or the customer name and delivery note number, and if you need it for an audit a few years from now, we will send it to you.